Inspection and Maintenance of Label Feeder

As an important equipment in the SMT production line, correct inspection and maintenance can ensure stable operation of the equipment and extend its service life. The following are the inspection and maintenance points for the label Fedler:

check

Please follow the following for inspection and maintenance.

(1) Inspection and maintenance must be carried out by the company's personnel or personnel authorized by the company's professional training.

(2) When disassembling for inspection and maintenance, please be sure to cut off the primary power supply. After inspection and maintenance, the removed parts must be restored to their original condition.

Regular maintenance of the machine

(1) This product is used to automatically peel off the materials on thin paper tape of thin sheet components and place them on the pulling pallet to supply a feeder for picking up by the pickup head of the SMT mounter. During use,

Regularly check whether there are thin sheets picked up by the special mounter.

(2) Regularly clean and maintain the optical fiber sensors and conveying rollers to see if there is any waste residue, and check whether the limit blocks on both sides of the release paper are loose and whether the motor can operate normally.

Maintenance points:

1. Daily inspection: Check whether the label feeding is smooth and whether the sensor is working normally

2. Weekly cleaning: Clean dust and residue from conveyor rollers and sensors

3. Monthly inspection: Check the wear of mechanical components and replace them if necessary

4. Regular calibration: Ensure that feeding accuracy meets production requirements

5. Professional maintenance: Complex faults need to be handled by professionals or trained technicians

Through standardized inspection and maintenance, equipment failure rates can be effectively reduced, production efficiency can be improved, and product quality can be ensured. It is recommended that enterprises establish complete equipment maintenance files to record each inspection and maintenance, and provide data support for equipment management.